Phosphorus-doped nickel cobalt oxide (NiCo2O4) wrapped in 3D hierarchical hollow N-doped carbon nanoflowers as highly efficient bifunctional electrocatalysts for overall water splitting.

Properly design and fabricate capable electrocatalysts with 3D hierarchical hollow framework to realize cost-effective and efficacious overall water splitting (OWS) are particularly meaningful for the large-scale arrangement of pivotal energy technology. In this study, P-doped NiCo2O4 nanoparticles encapsulated in N-doped carbon hierarchical hollow nanoflowers (P-NiCo2O4@NCHHNFs) were constructed using the hydrothermal-pyrolysis-phosphorization approach. This fascinating architecture can not merely serve as a conductive pathway for electron transfer, but at the same time effectively inhibited the aggregation and corrosion of the NiCo2O4 nanoparticles. Additionally, the P doping not only regulates electronic structure configuration to boost the intrinsic activity of the catalyst, but also enhance electrochemical surface areas to reveal more accessible active sites. Attributing to these characteristics, the as-prepared P-NiCo2O4@NCHHNFs exhibit preeminent electrocatalytic performance with low overpotentials of 283 mV and 162 mV for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) (at 10 mA cm-2), respectively. Specifically, by using the P-NiCo2O4@NCHHNFs as bifunctional catalysts, a low potential of 1.56 V (at 10 mA cm-2) is sufficient to drive overall water splitting with splendid durability. This study proposed an innovative strategy for the conceiving and fabricating high-performance catalysts via heteroatom-doping.

Realizing Ultrasensitive and Accurate Point-of-Care Profiling for ATP with a Triple-Mode Strategy Based on the ATP-Induced Reassembly of a Copper Coordination Polymer Nanoflower.

New strategies for accurate and reliable detection of adenosine triphosphate (ATP) with portable devices are significant for biochemical analysis, while most recently reported approaches cannot satisfy the detection accuracy and independent of large instruments simultaneously, which are unsuitable for fast, simple, and on-site ATP monitoring. Herein, a unique, convenient, and label-free point-of-care sensing strategy based on novel copper coordination polymer nanoflowers (CuCPNFs) was fabricated for multimode (UV-vis, photothermal, and RGB values) onsite ATP determination with high selectivity, sensitivity, and accuracy. The resulting CuCPNFs with a 3D hierarchical structure exhibit the ATP-triggered decomposition behavior because the competitive coordination between ATP and the copper ions of CuCPNFs can result in the formation of ATP-Cu, which reveals preeminent peroxidase mimics activity and can accelerate the oxidation of 3, 3', 5, 5'-tetramethylbenzidine (TMB) to form oxTMB. During this process, the detection system displayed not only color changes but also a strong NIR laser-driven photothermal effect. Thus, the photothermal and color signal variations are easily monitored by a portable thermometer and a smartphone. This multimode point-of-care platform can meet the requirements of onsite, without bulky equipment, accuracy, and reliability all at once, greatly enhancing its application in practice and paving a new way in ATP analysis.

Coordination polymer and layered double hydroxide dual-precursors derived polymetallic phosphides confined in N-doped hierarchical porous carbon nanoflower as a highly efficient bifunctional electrocatalyst for overall water splitting.

Controllable construction of proficient electrocatalyst with 3D hierarchical architecture to achieve low cost and high efficient overall water splitting is of great significance to the sustainable development. Hereby, trimetallic phosphides confined in N-doped carbon nanoflowers (CoNiP/CoNiFeP@NCNFs) were fabricated using CoNi coordination polymer nanoflowers/CoNiFe layered double hydroxide (CoNi CPNFs/CoNiFe LDH) as precursors followed by phosphorization. Benefiting from the unique 3D hierarchical porous architecture, preeminent conductivity, high specific surface area, efficient mass/charge transfer and synergic effect of various transition metals, the well-designed CoNiP/CoNiFeP@NCNFs exhibit extraordinary electrocatalytic performance for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media. Particularly, this novel material can work as a bifunctional catalyst in an integrated water-splitting electrolyzer, which only requires a low voltage of 1.55 V to realize the current density of 10 mA cm-2 with admirable durability (at least 28 h). This work certified the foreground of composites assembled by 3D hierarchical porous carbon and polymetallic phosphides for overall water splitting. It also provided a novel proposal for the rational designing and constructing highly active electrocatalysts by using coordination polymer and LDH as dual-precursors.

2D Layered Materials for Fast-Charging Lithium-Ion Battery Anodes.

The development of electric vehicles has received worldwide attention in the background of reducing carbon emissions, wherein lithium-ion batteries (LIBs) become the primary energy supply systems. However, commercial graphite-based anodes in LIBs currently confront significant difficulty in enduring ultrahigh power input due to the slow Li+ transport rate and the low intercalation potential. This will, in turn, cause dramatic capacity decay and lithium plating. The 2D layered materials (2DLMs) recently emerge as new fast-charging anodes and hold huge promise for resolving the problems owing to the synergistic effect of a lower Li+ diffusion barrier, a proper Li+ intercalation potential, and a higher theoretical specific capacity with using them. In this review, the background and fundamentals of fast-charging for LIBs are first introduced. Then the research progress recently made for 2DLMs used for fast-charging anodes are elaborated and discussed. Some emerging research directions in this field with a short outlook on future studies are further discussed.

Achieving Ultrasensitive Point-of-Care Assay for Mercury Ions with a Triple-Mode Strategy Based on the Mercury-Triggered Dual-Enzyme Mimetic Activities of Au/WO3 Hierarchical Hollow Nanoflowers.

The exploration of new strategies for portable detection of mercury ions with high sensitivity and selectivity is of great value for biochemical and environmental analyses. Herein, a straightforward, convenient, label-free, and portable sensing platform based on a Au nanoparticle (NP)-decorated WO3 hollow nanoflower was constructed for the sensitive and selective detection of Hg(II) with a pressure, temperature, and colorimetric triple-signal readout. The resulting Au/WO3 hollow nanoflowers (Au/WO3 HNFs) could efficaciously impede the aggregation of Au NPs, thus significantly improving their catalytic activity and stability. The sensing mechanism of this new strategy using pressure as a signal readout was based on the mercury-triggered catalase mimetic activity of Au/WO3 HNFs. In the presence of the model analyte Hg(II), H2O2 in the detection system was decomposed to O2 fleetly, resulting in a detectable pressure signal. Accordingly, the quantification of Hg(II) was facilely realized based on the pressure changes, and the detection limit could reach as low as 0.224 nM. In addition, colorimetric and photothermal detection of Hg(II) using the Au/WO3 HNFs based on their mercury-stimulated peroxidase mimetic activity was also investigated, and the detection limits were calculated to be 78 nM and 0.22 µM for colorimetric and photothermal methods, respectively. Hence, this nanosensor can even achieve multimode determination of Hg(II) with the concept of point-of-care testing (POCT). Furthermore, the proposed multimode sensing platform also displayed satisfactory sensing performance for the Hg(II) assay in actual water samples. This promising strategy may provide novel insights on the fabrication of a multimode POCT platform for sensitive, selective, and accurate detection of heavy metal ions.

3D holey hierarchical nanoflowers assembled by cobalt phosphide embedded N-doped carbon nanosheets as bifunctional electrocatalyst for highly efficient overall water splitting.

With the increasing energy and environmental crisis, exploring convenient and general strategies for constructing of highly active, stable, and cost-effective bifunctional electrocatalysts for overall water splitting are exceedingly desirable yet still challenging. Herein, 3D hierarchical mesoporous cobalt phosphide embedded N-doped carbon nanoflowers (CoP@NCNFs) are successfully constructed with ultrathin nanosheets by phosphatingof the cobalt coordination polymer nanoflowers (CoCPNFs). By virtue of their unique architecture and particular composition, the obtained CoP@NCNFs reveal extraordinary performance with ultralow overpotentials and small Tafel slopes for both OER (291 mV at 10 mA cm-2; 75 mV dec-1) and HER (166 mV at 10 mA cm-2; 76 mV dec-1) in alkaline medium. In particular, CoP@NCNFs can act as both anode and cathode to perform overall water splitting, and the assembled device only needs a cell voltage as low as 1.59 V to achieve the current density of 10 mA cm-2. Simultaneously, the CoP@NCNFs also exhibit admirable durability (at least 15 h) throughout the water splitting process. These remarkable electrocatalytic performances could be attributed to the synergistic effect of highlyactive CoP NPs and conductive mesoporous N-doped carbon nanosheets, which effectively improved the surface contact between catalyst and electrolyte, mass diffusion, and stability.

Controlled growth of AgI nanoparticles on hollow WO3 hierarchical structures to act as Z-scheme photocatalyst for visible-light photocatalysis.

Controllable fabrication of nanomaterials with hierarchical architecture have received much attention in the field of photocatalysis due to their enhanced light-harvesting efficiency. Moreover, fabricating direct Z-scheme heterojunctions havebeenproven to be effective way to enhance the photocatalytic performance of photocatalysts. Herein, hierarchically hollow WO3 nanoflower was successfully synthesized by a simple hydrothermal treatment of tungsten chloride (WCl6) in ethanol solution. Decoration of the obtained WO3 with AgI nanoparticles in situ can form the Z-scheme AgI/WO3 hollow hierarchical nanoflowers (AgI/WO3 HHNFs). The AgI/WO3 HHNFs exhibited excellent photocatalytic activity and remarkable stability for the degradation of tetracycline hydrochloride (TC-HCl) and Eosin B (EB) under the irradiation of a low energy consume light (LED lamp, 5 W). Interestingly, compared to pure AgI nanoparticles, 3D hollow WO3 nanoflowers and AgI/WO3 nanosheets, the AgI/WO3 HHNFs revealed conspicuously enhanced photocatalytic activity. Thisphenomenon could be associated to three aspects, namely the high light-harvesting efficiency, increased light trapping and scattering capability and strongly coupled Z-scheme heterointerface, which effectively improved the photoelectron-hole sepreation efficiency. Our work therefore provide a novel insight for the fabrication of 3D hollow hierarchical structures.